POWER bu
Ʃ
on:
Powers the unit on and o
ff
. By default when you
fi
rst use the power bu on, the unit will begin to
operate in cooling mode. The unit will remember the last used mode/se ngs if you shut down and restart.
Auto-Restart:
If power to the unit is interrupted, the air condi oner will restart itself in its last used mode/
se ngs once power is restored. The compressor will restart a er 3 minutes.
MODE select bu
Ʃ
on:
Selects the appropriate opera ng mode. Each me you press the MODE bu on, a mode is
selected in sequence that goes from AUTO, COOL, DRY (Dehumidify), and FAN. The mode indicator light illuminates
under the di
ff
erent mode se ng.
Cooling Opera
Ɵ
on:
Press the MODE bu on un l the COOL indicator light comes on. Press the UP and DOWN
arrows to select your desired room temperature. Press the FAN bu on to choose the fan speed.
Dry Opera
Ɵ
on (Dehumidify):
Press the MODE bu on un l the DRY indicator light comes on. Under this
mode you cannot select a fan speed or adjust the temperature. Make sure the exhaust hose is removed in
this
mode.
Auto Opera
Ɵ
on:
Press the MODE bu on un l the AUTO indicator light comes on. When the air condi oner
is set in AUTO mode it will automa cally select cooling or fan depending on what temperature you have se
lected and the current ambient temperature. Under this mode you cannot select the fan speed.
Fan Opera
Ɵ
on:
Press the MODE bu on un l the FAN indicator light comes on. Press the FAN bu on to
choose the fan speed. The temperature cannot be adjusted. Make sure the exhaust hose is removed in this
mode.
UP and DOWN bu
Ʃ
ons:
Used to adjust (increasing/decreasing) temperature se ngs (1 º C / 2 º F increments) in a
range of 17 º C(62 º F) to 30 º C(88 º F) or the TIMER se ng in a range of 1-24 hrs.
FAN bu
Ʃ
on:
Press to select the fan speed in two speeds- LOW and HIGH. The fan speed indicator light illuminates
under di
ff
erent fan se ngs.
LED Display:
Shows the set temperature in “º C” or “º F” and the Auto- mer se ngs. While on DRY and FAN modes
it shows the room temperature.
Control Panel / Remote Control Overview
