background image

Press again, there are two states:

HOLD light is off

the scanner can’t be operated manually.

HOLD light is on

the scanner is in a hold state.

CHANNELS

In manual state, 16 channel
slides can set the channel
value of the chosen scanner.
CHANNELS must cooperate
with SCANNER.

SCENE

Sunny 512 User’s Manual

Sunny512 console can save 48 scenes in 3 saving section with 16 scenes each.

A / B / C Scene section key

When the key is pressed, the corresponding indicating light is on and
indicates that the section is current section. If current section is A, press
scene number key and A01-A16 scene can be operated. If the indicating
light of not current section is on, it indicates that there are scenes are
running in that section.

SINGLE Single scene key

Set for each section respectively. The key is used to switch the following
states:

When SINGLE light is on, the current section only can run a scenes.

When SINGLE light is off, the current section can run multi scenes at the same time.

1 ~ 16 Scene number key

Cooperating with scene section key, 16 scene keys can operate A01-A16, B01-B16, C01-C16, 48 scenes.
Using SINGLE key, single scene or multi scenes can be operated.

CHASE

Sunny512 console can save 48 chases in 3 saving section with 16 chases each.

A

/ B

/ C

Key

When the key is pressed, the corresponding indicating light is on and
indicates that the section is current section. If current section is A, press
scene number key and A01-A16 chase can be operated. If the indicating
light of not current section is on, it indicates that there are chases are
running in that section.

- 5 -

Summary of Contents for Sunny 512























Reviews: