AVALITES Sunny 512, User Manual

Page: 11 / 22

Sunny 512 User’s Manual
For 16Bit scanner, if the values of X-H,Y-H are set and the values of X-L,Y-L are set to [no], the 16Bit scanner
will be running in 8Bit X/Y resolution. This will lost some characteristics of 16Bit scanner, such as high
precision of X/Y orientation and the smoothness of the moving trace.
Auto correction to the wrong setting:
X-L=no, Y-L=no must be set at the same time. That just one is ‘no’ is a mistake. Sunny512 checks and
corrects X-L, Y-L to be ‘no’ at the same time automatically.
Check the X/Y setting of the scanners:
Use following ways to check:
1. Press SET X/Y key, the indicating light is on. It is in setting scanner’s X/Y state.
2. Use scanner keyboard to choose scanner. Check the X/Y setting.
3. Repeat step 2 to check X/Y setting of all scanners.
4. Press
SET X/Y key to quit the edit state.
The manual mode
The scanner’s channel values, such as intensity, gobo, X/Y, pattern, and color, can be set manually.
Usually, the control contents of each channel of various scanners are different. With the particular comprehension
to the control contents of each channel of various scanners, the scanner connected to the control net can be
controlled with facility. The control contents of each channel of ordinary scanners can be seen in the append
tables.
In the edit state or running state, it can be operated manually.
Manual operation is the highest priority operation. The chosen scanner will be divorced from the running scene,
chase and environment automatically. Manual operation is the basic operation. Manual operation, especially multi
scanner manual operation, can be saved as scene, which is the basic operation of edit chase step.
Cooperated with 1-16 and 17-32 keys,
1 ~ 16 keys can make choice to 32 scanners.
When the number indicating light is on, that scanner is in the chosen state. It can be set by CHANNELS slider and
modulation wheel.
CHANNELS 1-16 channel slider and modulation wheel
The values of each channel of scanners can be set by 1-16 channel sliders. X channel of a scanner is set by
modulation wheel
. Y channel is set by modulation wheel
▲▼
. The set range of a slider is 0-255.
Whether 8bit or 16Bit X/Y scanner, the set range of a modulation wheel is 0-999. It represents the moving
range of X axis or Y axis. For 16Bit scanner, modulation wheel
controls X-H and X-L at the same time.
Modulation wheel
▲▼
controls Y-H and Y-L at the same time. For 8Bit scanner, modulation wheel
controls X-H only. Modulation wheel
▲▼
controls Y-H only.
When the X/Y channel is controlled by modulation wheel, the corresponding X/Y slider is locked. The X/Y
position of a scanner must be set by modulation wheel.
In the manual mode of a scanner, slider and modulation wheel can change the value of the corresponding
channel. The screen displays the value of these channels.
When the scanner key is pressed, the X/Y current appears at the right part of the screen. Turn the modulation
wheel, the values of X/Y can be changed.
- 10 -