Move 1-8 channel slider, the screen displays:
Move 9-16 channel slider, the screen displays:
Sunny 512 User’s Manual
CH 1
2
3
4
5
6
7
8 | X:120
123 58 204 32 12
0
0
0 | Y:891
CH 9 10 11 12 13 14 15 16 | X:120
0
0 14 128
0
0
0
0 | Y:891
Note: the values of channel and X/Y depend on the slider position and the X/Y modulation wheel value. In a
moment of slider moving, the value display will disappear until the next moving.
Manual operation of single scanner
1
．
Press HOLD
key to make the indicating light off.
2
．
Choose scanner: press scanner number key (cooperate with 1-16 and 17-32 keys ), the indicating
light is on.
3
．
Use CHANNELS sliders to set the channel values, use modulation wheel
and
▲▼
to adjust X/Y
position.
Manual operation of the same kind multi scanners
1
．
Press HOLD
key to make the indicating light off.
2
．
Choose scanner: according to the 2 step of Manual operation of single scanner, multi scanners can be
chosen. (Note: only the scanners with the same X/Y channel can be chosen at the same time.)
3
．
Use CHANNELS sliders to set the channel values. Use modulation wheel
to adjust X position. Use
modulation wheel
to adjust Y position. And the adjusted channel values are set to all chosen
scanners at the same time.
Manual operation of the different kind of multi scanners
For the manual operation of the different kind of scanners, set one kind of the scanners and make these
scanners in the hold state first. Then choose another kind of the scanners to set. This is also the usual
operation method to set 1 scene. The hold state of the scanner can be change to the choosing state by
pressing its key to make the indicating light on.
1
．
Press HOLD
key to make the indicating light on.
2
．
Choose scanner: use the way of choosing single scanner or multi scanners to choose scanners. (Note:
only the scanners with the same X/Y channel can be chosen at the same time.)
3
．
Use CHANNELS sliders to set the channel values. Use modulation wheel
and
▲▼
to adjust X/Y
position.
4
．
Press the corresponding number key of the chosen scanner to make the indicating light blink. The set
values of these scanners are in the hold state. And the adjusted channel values are set to all chosen
scanners at the same time.
5
．
Repeat 2-4 steps to set other scanners manually.
Cancel the manual operation of scanner
Press CLEAR
key, the manual operation is canceled and the set values of the scanners can not be saved.
- 11 -
Summary of Contents for Sunny 512
Page 1: ...User s Manual Ver 1 0 ...
Page 22: ......
