Avady PANDuo pH Turboxy Cl T, Instruction And User'S Manual, Page: 9 / 28

Instructions and user manua l PANDuo pH Turboxy
NOT044ENV02
9
3.2 Installation
3.2.1 Prepare the sensor for the start-up
3.2.2 Connect the pH sensors to the corresponding plug of the instrumen t
Plug the plug into the bayonet socket Rotate the plug ¼ turn to close the connection
3.2.3 OPTIONNAL Connection of the lances of aspiration on the device
2 protective covers Jack
Remove the 2 protective covers
from Jack sockets
Plug the jack
plug into the
socket
If you remove the suction lances for a long time:
put the protective covers back on the Jack sockets
1) Remove the sensor's
protective
cap and
keep it to re-use it for
the winter shutdown
period
2) Leave the sensor submerged
in tap water for at least
20
minutes , before proceeding
with the calibration.
We therefore recommend that
you start your installation with
this step.