Avady PANDuo pH Turboxy Cl T Instruction And User'S Manual Download Page 22 | Manualshive

Page: 22 / 28

Avady PANDuo pH Turboxy Cl T Instruction And User'S Manual Download Page 22

Instructions and user manua

l

PANDuo pH Turboxy

NOT044ENV02

22

↓

7.3pH 1.2Cl/↑

LANGUAGE

ENGLISH

Tip

PRESS THE

ESC

KEY AT ANY TIME TO EXIT

MENU

CONFIGURATION

SYS

TECHNICAL DETAIL

NO

STARTUP DELAY

30 min

NETWORK

ID: xxxxx

NETWORK:ID : xxxxxx

The Duo pH Turboxy switches to pairing mode for 60
seconds.

NETWORK

ID: xxxxxx ?

NETWORK

ID: xxxxxx 1

5.4

Pairing the PAN DUO PH TURBOXY to AvadyConnect (OPTIONAL)

In case of change of the PAN DUO PH TURBOXY on the installation the pairing of the new device will have to
be realized so that its information can go back up on the site

www.avadyconnect.com

1) Bring AvadyConnect near the PAN DUO PH TURBOXY
2) Go to the network menu of PAN DUO PH TURBOXY as below

3) Feed AvadyConnect during the scrolling of the chronometer of PAN DUO PH TURBOXY
4) At the end of a few seconds, the number of AvadyConnect appears in the window of the PAN DUO PH
TURBOXY ID : ------

5) The device is paired. Rest on

to leave the menu SYS and return to the display by default.

6) Reconnect AvadyConnect to the internet network.

«
...
20
21
22
23
24
...
»

Summary of Contents for PANDuo pH Turboxy Cl T





























Reviews:

No comments