10
Infrared Control
Most functions of the
imageMAX PLUS
can be controlled from the CR-20
Infrared Remote Control unit. Below is a brief description of the commands.
♦
Turns Power On/Off
Display:
Turn Resolution Information OSD On/Off
C-Video:
Selects Composite Video Input
S-Video:
Selects S-Video Input
YCbCr:
Selects Component Video Input
PC:
Selects PC Input to Loop-through
VGA:
Sets Output Resolution as 640x480
SVGA:
Sets Output Resolution as 800x600
XGA:
Sets Output Resolution as 1024x768
SXGA:
Sets Output Resolution as 1280x1024
480p:
Sets Output Resolution as 852x480p
576p:
Sets Output Resolution as 852x576p
720p:
Sets Output Resolution as 1280x720p
1080i:
Sets Output Resolution as 1920x1080i
Aspect:
Selects Normal or Wide Aspect Ratio
IR Set:
Hold for 15 sec to unlock Front Panel
3D:
Turn 3D Enhance On/Off
NR:
Turn Digital Noise Reduction On/Off
Mode:
Same as Mode on Front Panel
Picture:
Same as Picture on Front Panel
Reset:
Not Used for this model
