AV Stumpfl SC MASTER 16, User Manual, Page: 121 / 139

aP#
PAUSE function. Corresponds to the PAUSE key on
the remote control unit
aPx#
PAUSE show x. Only the specified show is put in
Pause Mode.
x = show number from 1 to 200.
aPEx#
PAUSE END Show x Pause Mode is only canceled
for the specified show.
x = show number from 1 to 200.
aP*#
PAUSE all shows. All running shows are put in
Pause Mode.
aPE*#
PAUSE END for all shows. Pause Mode is canceled
for all shows.
aY#
YES function. Corresponds to the YES key on the
remote control unit
axPy#
Start player x at track number y.
y = channel number from 1 to 8.
y = 1 to 255 corresponds to the order of the sound
track in the Show.ini
axPS#
Stop player x.
y = channel number from 1 to 8.
aNm.c:x#
Puts output channel c in SC Net module m to the
value specified by x.
m = 1 to 125.
c = 1 to 512.
x = 0 to 255.
aNm.c+x#
Increments output channel c in SC Net module m to
the value specified by x. If the maximum value of
255 is exceeded by the operation, the value is
limited to 255.
m = 1 to 125.
c = 1 to 512.
x = 0 to 255.
aNm.c-x#
Decrements output channel c in SC Net module m to
the value specified by x. If the operation causes the
minimum value to fall below 0, the value is limited to
0.
m = 1 to 125.
c = 1 to 512.
x = 0 to 255.
SC Master 16 13BTechnical Appendix
•
113