48
ConteraIP
®
Omni LX RS Installation Manual
Video & Audio
Menu
Feature
Description
Select channel
Select the desired channel to change video
settings or select Sync All Channels to
change video settings for all four channels
at once.
Video Compression:
H.265 / H.264
Radio buttons to select the desired
compression.
Resolution
Radio buttons to select the desired
resolution. Options vary based on the
sensor resolution being used.
Enable SNA
TM
Enable the SNA
TM
feature on the
camera. This feature utilizes both Smart
GOP and Smart ROI to reduce bitrate
without impacting the image quality.
Smart GOP sets GOP to automatically
increase when no moving objects are
detected.
Smart ROI will increase the bitrate of
moving objects and make them clearer.
Variable Bitrate
Maintains the Quality settings configured.
There may be variation in the bit rate
output from the camera when using this
mode.
Maximum Bitrate
Maintains variable bit rate control and
maintains the bitrate under the rate limit
you choose. It can be set from 64 kbps to
8000 kbps.
H.264 Quality
H.264 image quality setting for variable bit
rate control. Setting a lower value results in
higher image quality or setting a higher
value results in lower image quality.
Frames Per Seconds
Frame rate adjustment for the camera
video stream.
NOTE:
For 20MP model, FPS will be up to
50% of specified FPS if WDR is enabled.
NOTE:
For 20MP model, if one stream is
set to full resolution and another one is set
to full or half resolution, the maximum FPS
of the main and sub stream is up to 15
FPS.
