11
ConteraIP
®
Omni LX RS Installation Manual
13.
Use the supplied security L-key to attach the camera to the mounting plate.
14.
Swing the camera up into place, and then use a Phillips head screwdriver to the camera to the
mount plate. Use caution to not bend or pinch the cables during this step.
15.
Secure the cover plate as shown in the image below.
16.
Remove the protective film at the end to avoid leaving fingerprints, scratches, or any damage
on the dome cover during the installation.
NOTE:
To configure the camera, reference the camera discovery, set-up, and configuration section.
