QA47.03 installation manual sola-cure 2020 rev c.
Auxano Technologies Ltd, www.sola-cure.com
TOP MOUNTING BLOCKS
1.
Face fix
: Sola-Cure blinds are supplied with two L
shaped brackets. The brackets are for use when face fixing
only.
2.
Top fix
: If fixing to the ceiling or horizontal surface above or
below the window, the L brackets are not required. The mounting
block can be fitted directly to the horizontal surface.
Ensure the top mounting block is secure but free to rotate.
Ensure the hole in the block is visible, and is accessible with a screwdriver or similar shaft.
3.
Both blocks should be the same distance from the window.
4.
Rotate the mounting blocks approx. 30 degrees clockwise so that the depth from front to back will
easily sit inside the lips on the top of the cassette. Ensure you have access to the hole in the
mounting block.
5.
Hold the cassette up to the mounting block in the location that you intend to fit the blind. Check the
cassette will fit.
Tip: Move the cassette slightly to the left by about 5mm
.
6.
Note: the mounting blocks can be positioned anywhere along the cassette This allows for a great
deal of flexibility on where the bracket/blocks are located.
7.
Once satisfied with the positioning of the cassette, introduce the top face of the cassette to the
bottom face of the mounting block. Using a screwdriver or similar tool with a small round shaft, insert
the shaft into the hole of the mounting block and turn anti-clockwise until the lip of the mounting
block is underneath the lip of the cassette(see diagrams below)
8.
Check that the rear lip of the mounting block has also engaged correctly with the cassette
Face fix
Top fix
