AUX AM Series, Installation Manual

Page: 48 / 62

CARE AND MAINTENANCE
3. Care and maintenance
A cloth dampened with cold water may be used on
the indoor unit if it is very dirty. Then wipe it with a
dry cloth.
Do not use a chemically treated cloth or duster to
clean the unit.
Do not use benzine, thinner, polishing powder, or
similar solvents for cleaning. These may cause
the plastic surface to crack or deform.
Never use water hotter than 40 C to clean the front
panel, it could cause deformation of discoloration.
CAUTIONS
Turn the system off before cleaning. To clean, wipe
with a soft, dry cloth. Do not use bleach or abrasives.
NOTE: Supply power must be disconnectd before
cleaning the indoor unit.
A clogged air filter reduces the cooling efficiency of
this unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to an angle until it
stops with a clicking sound.
2. Take hold of the handle of the air filter and lift it
up slightly to take it out from the filter holder,
then pull it downwards.
3. Remove the
Active Carbon & Dust Filter from the
indoor unit.
Clean the it once two weeks.
Clean the it with a vacuum cleaner or water,
then dry it up in cool place.
..
Filter Handle
4. Remove the A
Plasma Dust collector/Silver Ion filter /Bio filter /
Vitamin C filter) from its support frame.
(The installation and removing method of the air
freshening filter is different depending on the models,
see the pictures marked and on the left.
Clean the air freshening filter at least once a month,
and replace it every 4-5 months.
Clean it with vacuum cleaner, then dry it in cool place.
5. Install the air freshening filter back into position.
6. Insert the upper portion of air filter back into the unit
taking care that the left and right edges line up
correctly and place filter into position.
ir Freshening Filter ( Optional filter :
.
.
1
2
Air freshening
filter
Air freshening filter
1
2
Cleaning the air filter
Cleaning the grille, case and remote controller
48