AUX ALCF-H18/NDR3HA, Service Manual

Page: 91 / 174

R32
High Efficiency DC Inverter LCAC
87
2.3 Parameter Setting by XK-04/ XK-05
Parameter checking
Press the “FUNCTION” button for 5 seconds, enter into the parameter checking
interface .
the wired controller’s address will be displayed in the temperature zone of LED screen
( press “FUNCTON” button, the wired controller’s address will flash, the wired controller ‘s
address can be changed through press the
“ ”
or
“ ”
,
then press “FUNCTION” buton to
confirm);
In the timing setting zone : HH means seires NO. MM means parameter value. After
Entering into IDU parameter checking , via pressing the
“ ” or “ ”
buton ,you can check
the parameter value of seires NO.
【
04
】【
05
】【
1
】
.
Parameter setting
Only in parameter checking model ,press the “FUNCTION” button for 5 seconds,
Enter into parameter setting model.
The corresponding parameter valve”
MM” begain to flash,changing it throuth pressing
the “ ” or “ ” buton,after finished ,press the “FUNCTION” button to confirm.When
finishing parameter setting,it will automatically go back to parameter checking model.
1. Press “FUNCTION” for 5S , enter parmater checking model
2. Press “ ”or“ , change the parameter value of seires NO.
HH: means seires NO.
MM: means parameter value.