AUX ALCF-H18/NDR3HA Service Manual Download Page 134

Page: 134 / 174

R32

High Efficiency DC Inverter LCAC

2. Precaution

◇

Hanging location should be able to support the unit’s weight, there should be no

increase in noise and vibration. If the hanging location needs reinforcement, it should be
reinforced before installation;

◇

Choose the space above the ceiling that can put the indoor unit inside;

◇

The location should be easy for drainage;

◇

The unit should not be installed in the heat source, steam or oil mist source (such as

machine room, kitchen, laundry room, mechanical workshop, etc.);

◇

Choose the location at least 1 meter away from TV and radio, in order to avoid

interference to them

◇

There should be certain distance between indoor unit and obstacles for maintence;

◇

In case of leakage of refrigerant, units should immediately stop running, and contact

with maintenance personnel in time. There must be no fire at the site, because the
refrigerant will turn to harmful gas when get to the fire.

3. Cassette installation

3.1 Installation spacing

Summary of Contents for ALCF-H18/NDR3HA















































































































































































Search results

Summary of Contents for ALCF-H18/NDR3HA

Reviews:

Related manuals for ALCF-H18/NDR3HA

Brands by name

Popular brands

AUX ALCF-H18/NDR3HA, Service Manual

Search results

Summary of Contents for ALCF-H18/NDR3HA

Reviews:

Related manuals for ALCF-H18/NDR3HA

Brands by name

Popular brands