20
connector by gently twisting and pulling it out.
3. Lift a corner of the electrode and slowly peel it
away. Avoid touching the gel as much as possible.
4. DO NOT peel the electrode off by the wire.
5. Place the electrodes back to the storage film,
and reseal them tightly with a zip bag to prevent
dry-out. Store them at room or cool temperature
and keep out of direct sunlight.
CHARGING THE BATTERY
1. Turn off the controller.
2. Connect the controller and the charger (not
included) with a USB extension cord. Plug the
charger (not included) into any power outlet. The
charging process will last approximately 3-4 hours.
Note:
1. Only charge the controller when the battery is
completely drained the first 2 times. Do not use the
controller when charging.
2. Unplug the charger (not included) from the
power outlet when the charging is completed.
3. When the massage intensity drops, it indicates
that the device needs to be charged.
4. Recharge it and then continue to use the device.
