25
8. OTHER FEATURES
1. The intensity will immediately down to zero and keep flashing if the unit is not properly connected
to the body.
2. When the output intensity level of CH1 and CH2 is over 0, the corresponding output sockets of
CH1/CH2 will light up. Once the open circuit happened, the corresponding output sockets will light
off after 5 seconds.
3.After switch on, if no keys are pressed in 10 seconds, the LCD backlit will turn off automatically.
Press any key to light up the LCD again.
4.The treatment time will be accumulative recorded when the output level is above zero, by pressing
and holding the key “MENU” and ▼ of CH2 for 3 seconds, the treatment time accumulated in
minute can be displayed. By pressing and holding the key “MENU” and ▼ of CH1 for 3 seconds to
clear the treatment time to zero.
