AUTOTERM PLANAR-2D-12/24, Installation Instructions Manual

Page: 22 / 29

22
3.9.2. Fuel Pickup Installation
Fuel pickup is mounted on the fuel tank as shown in
Fig.20(a). Fig.20(b) shows installation of a special washer
with the fuel pickup in the fuel tank hole. Before
installation, the fuel pickup should be cut to the required
length at 45 ° Fig.21).
3.9.3 Fuel Pump Installation
The fuel pump is used for metered supply of fuel into the
combustion chamber.
The fuel pump is operated by electrical impulses sent by
the control unit. The pulse frequency corresponds to the
certain performance of the heater.
The fuel pump is mounted on a rubber cushion clamp
(Fig. 23).
The fuel pump is preferably mounted closer to the fuel
tank and below the lower fuel level in the fuel tank.
Heaters are equipped with fuel pumps manufactured by
Thomas Magnete. The correct mounting position of the fuel
pump is shown in Fig.22