autosen AI002, Manual

Page: 13 / 20

Art. no. Flush/Non-flush Sensing range /
frequency
Output Structural
shape
Connectors
AI028 Flush 4 mm / 2000 Hz Normally open M12 thread M12
AI029 Non-flush 10 mm / 2000 Hz Normally open M12 thread M12
AI030 Flush 8 mm / 2000 Hz Normally open M18 thread M12
AI031
Non-flush 15 mm / 2000 Hz Normally open M18 thread M12
AI032 Flush 15 mm / 2000 Hz Normally open M30 thread M12
AI033 Non-flush 30 mm / 2000 Hz Normally open M30 thread M12
AI036 Flush 3 mm / 2000 Hz Normally open M8 thread M8
AI037
Non-flush 6 mm / 2000 Hz Normally open M8 thread M8
autosen inductive sensors - Factor 1
Have protection rating IP 67, IP 68, IP 69 K, are magnetic-field immune and detect all metals with the
same sensing range (correction factor = 1).
A transmitter and receiver coil system on a circuit board forms a transformer.
Electrically conductive materials in the near field influence the coupling factor of the transformer.
The change of the coupling factor is used by downstream electronics for a switching signal.
By omitting the ferrite core, the inductive F1 sensors are less sensitive to interference from strong
magnetic fields.
Find a wealth of technical information, incl. engineering data and suitable genuine accessories, at:
autosen.com/
faktor1
1: Connection
2: Housing
3: Downstream electronics
4: Circuit board with transmitter and receiver coil
5: Alternating electromagnetic field = active face
6: Target = electrically conductive material