![background image](http://html1.mh-extra.com/html/autoscript/elp-15-plus/elp-15-plus_user-manual_3022799017.webp)
15
Installation
Fitting the Counterbalance Weights
The prompter installation must have counterbalance weights fitted to
the rear of the mounting to compensate for the front-heavy effect of the
prompter monitor and hood.
1.
Unscrew the end caps from the mounting rods protruding from the
rear of the mounting plate.
2.
Carefully slide the
counterbalance
weights onto the rods.
3.
Refit the end caps
securely.
Balancing and Adjustments
Balancing is achieved by correctly positioning the counterbalance
weights. Other adjustments can also be made to the prompter
assembly position if this is a requirement of the installation.
Basic Balancing
1.
Slide the counterbalance weights along the rods and secure in
position with the two clamping screws. Unlock the tilt axis and
check the fore and aft balance of the payload.
WARNING!
After fitting or adjusting the prompter assembly
and any accessories, the payload must be correctly re-
balanced.
Summary of Contents for ELP 15 PLUS
