9
Installation
Mounting the Prompter Monitor
When the extrusion is fitted and correctly secured to the camera mount,
the prompter monitor can be fitted.
1.
Fit the mounting brackets to the monitor. Ensure that the dowel pin
is seated in the slot on the monitor. Do not fully tighten the fixing
screws at this point.
2.
Align the clamps on the monitor brackets with the slot in the front
of the extrusion and slide the assembly into position.
3.
Ensure that the indents on the mounting brackets are correctly
seated on the extrusion.
WARNING!
Before attempting to install or adjust the
prompter monitor assembly, the tilt axis of the head support
must remain securely locked horizontally.
Summary of Contents for ELP 15 PLUS
