![background image](http://html1.mh-extra.com/html/autoscript/elp-15-plus/elp-15-plus_user-manual_3022799013.webp)
11
Installation
3.
Repeat steps 1 and 2 for
the opposite hood bracket.
4.
Align the clamps on the ends of the hood brackets with the slot in
the top of the extrusion. Slide the hood assembly onto the
extrusion.
Fitting the Extrusion End Caps
Firmly press the extrusion end caps
into place at both ends of the extrusion.
Adjusting the Hood Position
The vertical and horizontal position of the hood must be adjusted to
centralise it with the camera lens.
1.
Loosen the four clamping knobs on the rear slides of the hood
mounting brackets.
WARNING! Risk of personal injury or injury to others
.
When the hood has been installed, the supplied extrusion
end caps must be fitted.
Summary of Contents for ELP 15 PLUS
