Connect main unit(
①
) and
φ
37mm
conversion ring(
④
) for XR550V.
Install (
①
+
④
) to camera’s filter
thread which is located around lens.
Instruction for connecting to each
microscope type is as follow.
Take out eyepiece
lens
and directly install main
unit(
①
)
When inside diameter
of eyepiece is
φ
30mm,
use conversion ring(
②
)
Insert main unit (
①
)
directly into phototube.
If a fixating screw is
attached to phototube,
use it to secure the
adapter tightly to the
phototube.
※
Compatible with direct (1.0x) c-mount only
※
When unstable, try fixate with duct tape, or
have a support unit beneath the camera.
Screw-in C-mount sleeve
(
③
) to microscope
’
s
C-mount. Install
conversion ring (
②
) to
main unit(
①
), and insert
into C-mount sleeve.
Secure with screw at the
side.
Install
［
NY-JIS
］
fixation sleeve (sold
separately) to JIS
phototube. Then,
Insert main unit(
①
)
into it and secure with
screw at the side of
［
NY-JIS
］
.
Install
［
NY-BH
］
fixation sleeve (sold
separately) to PT
phototube. Then,
Insert main unit and
secure with screw at
the side of
［
NY-BH
］
.
