Autoscript ClockPlus, User Manual

Page: 25 / 33

23
Troubleshooting
Fault Check Comments
The accessory is not
powering up.
Check that the DC power source is connected and secured.
See the section Power Connections on
page 15.
The tally indication
(ClockPlus or
TallyPlus) is not
changing colour status. Check that the appropriate tally connections for the installation have
been correctly made. See the section Directly Connecting the
Opto Sensor on page 13.
Use the opto sensor trim control to adjust the switching threshold.
See the section Adjusting the Opto Sensor
Sensitivity (TallyPlus and ClockPlus) on
page 18.
Check that the opto sensor is correctly positioned over the camera
tally light, and that the light is functioning. See the section Mounting the Tally Opto
Sensor on page 8.
Timecode is not being
displayed on the
ClockPlus or has
become inaccurate.
Check that the timecode source (LTC or VITC) has been connected
and is active. See the section Timecode Connections
(ClockPlus) on page 17.