18
Configuration
Adjusting the Opto Sensor Sensitivity
(TallyPlus and ClockPlus)
The sensor trim control adjusts the threshold at which the opto sensor
(internal or external) causes the tally indication to change colour.
Turning the control clockwise lowers the threshold at which the unit
switches from green to red, effectively increasing the sensitivity of the
opto sensor.
Adjusting the Display Brightness (TallyPlus
and ClockPlus)
The brightness of the LED display digits can be adjusted with the BRI
switch. Two brightness levels are available.
If the tally status colour change is NOT required, the colour
can be set to a permanent green display by turning the
sensor trim control fully anti-clockwise.
Standard brightness
High brightness
Summary of Contents for ClockPlus
Page 31: ......
Page 32: ...30...
Page 33: ...A V Autoscript itec Group brand Publication part No ACC 4980 1 www autoscript tv...
