Autoplugin Key-V2, User Manual

Page: 8 / 8

8
6 Operation
cycle too
short The heater was switched
off spontaneously Make diagnostics of the heater
if the error appears again
8 CAN-bus
error There is a problem with
connection to the CAN-
bus Disconnect the module from
OBD-II socket and reconnect
it
9 Settings error Settings have been
stored incorrectly Reset the settings (with 8.1.1
code), readjust the module
11 Heater no
connection The heater is unplugged
or out of order Make diagnostics of the heater
The device is powered from the diagnostic socket. Therefore if there is no any
indication on the module first of all check the car’s fuse for the diagnostic
socket.
© Autoplugin ES