3
Description
The
Autoplugin Key-V2
is an electronic module designed to add a remote control
ability to the fuel-fired heater (parking heater, fuel operated heater, pre-heater),
factory installed in
Volvo S60
(2010-2018),
V60
(2010-2018),
V70
(2007-2016)
,
XC70
(2007-2016),
S80
(2007-2016) or
XC60
(2008-2016). The device is plugged
into the diagnostic socket, placed on the dashboard, and controls the heater via
CAN-bus.
Module Possibilities
·
Immediate start of the heater with Volvo car’s key. The remote control
key with 5 buttons or the PCC with 6 buttons can be used for heater
control
·
Immediate stop of the heater with Volvo car’s key
·
Indication of the heater autonomous operation with direction indicators
flashing in rearview mirrors.
·
Additional main battery protection from discharging by inspecting of
voltage level and time of the heater autonomous operation
Package Content
1. Autoplugin Key-V2 cartridge
2. User Manual brochure
Connection
The module needs that 2 timers and direct start / stop function for the heater
control are present in the CIP. Therefore it may be necessary to load special
software to the CIP at first by the means of Volvo dealer’s equipment.
Check the “Lamp” button of the remote control key switches on the “Approach
lighting”. Activate the “Approach lighting” in the MY CAR menu if necessary.
Autoplugin Key does not need professional installation. Find the diagnostic socket
at the left lower point of the dashboard. The socket is placed closer to the bonnet
opening handle. Take the module to your hand in such manner, that the LED is
placed closer to the driver’s door side, and then gently push the module to the
socket. LED starts flashing for approximately 10 seconds, waiting for information
from CAN-bus. Wait until the LED stops flashing before the operation. Turn the
ignition on if the LED continues flashing after 10 seconds period expired.
