3.2 S-Video Configuration Files
X
N
Connect (the configuration software program on the
AutoPatch Software CD
shipped with the Modula) supports Modula systems with S-Video connectors.
Important:
Use this software
only
if you need to change the configuration
information from the original specification.
In Modula systems, each signal in a component signal has its own signal path.
When you select a connector in the virtual matrix view, the properties box in the
right pane indicates the two signals for each S-Video connector as appended
numbers.
Signal Paths Example
The connector for Input 6 contains two signal paths (see Figure 10):
ä
S-Vid V_IN_006.1 for the “Y” signal path
ä
S-Vid V_IN_006.2 for the “c” signal path
See Chapter 8 of the
Installation & Setup
section of this binder for information
on managing configuration files with X
N
Connect.
Modula Boards & Specifications
3-3
S-Video Configuration Files
S-Video
Figure 10: Input connector properties showing 2 signal paths for one
S-Video connector
Summary of Contents for Modula 34-27
Page 1: ......
