Jun/22/2009
RST1000 OP REV.A
7
Spin down the
switch
to the page 1
Press the button
4
to
start Demo movie
Demo movie playing
Press the any Button to
exit.
E- P2- 1. “POWER SAVE” SETTING: Example set the “Power Save Enable”.
While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
Spin down the
switch
to the page 2
Press the button
1
and it
will display previously
setting.
Press the button
1
to
change the setting.
Press the
button and
the setting is done.
E- P2-
2. “PARKING METER” SETTING: Example set the “Parking Meter 30 min..
Note: When “parking meter” trigger presses any button to stop the beeper.
Spin down the
switch
to the page 2
Press the button
2
Press the button
1
three
times to set the parking
timer to 30 minutes.
Press the
button to
start the parking meter
and the
icon will
flash on the main page.
D- P2- 3. “PARKING AREA” SETTING: Example set the “Parking Area.” to “B120
Spin down the switch
to the page 2
Press the button
3
, it will
display previously
parking area
Press the button
2
to
clear the parking area,
and the “
-
” flashes for
setting.
Spin up the
switch to
set segment “B”
Press button
1
confirm
the programmed
segment and move
forward to next
segment for setting.
Spin down the
switch to set segment
“1”
Press button
1
confirm
the programmed
segment and move
forward to next
segment for setting.
Spin down the
switch to set segment
“2”.
