Jun/22/2009
RST1000 OP REV.A
5
While the
icon
flash
Push the
button, the count
down timer will
display.
Press the button
2
to set off the
count down time
or
or
While the
icon flash
Push the
button, the OLED screen will display individually i.e. daily start timer,
timer start or temperature start, depend on which you selected.
While the
icon
flash
Push the
button, the alert
alarm time will display.
Press the button
2
to set off
the alert alarm timer
D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:
1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen will
display the transceiver button configuration you select.
2. Within 5 seconds press the button 1, 2, 3 or 4 to remote control “button configuration” you selected.
Note: If 5 seconds of inactivity expired, or push the
button, the transceiver button configuration mode
will exit.
Spin up the switch
to the page 1
Spin up the switch
to the page 2
Spin up the switch
to the page 3
Spin up the switch
to the page 4
Spin up the switch
to the page 5
Spin up the switch
to the page 6
Spin up the switch
resume to main page.
E. SELECT THE TRANSCEIVER FEATURES:
1. Spin down the Switch to select the transceiver feature you need and the OLED screen will display
the features you select.
2. Press the button 1, 2, 3 or 4 once within 3 seconds after finished selection and the OLED screen will
change the display alternatively.
Note: If 5 seconds of inactivity expire, or push the
button, the transceiver features program mode will
exit.
