27
chirps with a long chirp is heard then release the valet switch. You are
now in the Start feature
‘D’
programming mode.
Select “Checking Type”:
3. Press the
+
transmitter button to set the “Timer Checking Type”.
[3] LED flash, [3] horn chirp to confirm this setting
4. Once you complete step 3, you can adjust and test “Start Timer” as
below:
TIMER START PROGRAMMING: (TEST & ADJUST)
While the system stay in Start Feature
“D”
programming mode,
1. Press the
button on the transmitter to start the vehicle.
2. If everything goes well:
a. Press the ‘
button on the transmitter to stop engine running. You
have completed this programming successfully.
b. Press
button on the transmitter to exit the program mode. There will
be 3 long chirps & 3 parking light flashes for confirmation.
3. If the crank time is too long, (Engine is running, while starter
still cranks):
a. Press the
button on the transmitter to stop engine running.
b. Press the
button on the transmitter to set proper “Start Timer”. The
chirp & LED pause will confirm entry. (Decrease “Start Timer” is
necessary.)
c. Repeat the step1 – 4 if necessary.
4. If the crank time is too short, (Engine not running, while starter
stops cranking):
a. Press the
button on the transmitter to stop engine running.
b. Press
button on the transmitter to set proper “Start Timer”. The chirp
& LED pause will confirm this entry. (Increase “Start Timer ” is
necessary.)
c.
Repeat the step1 – 4 if necessary.
RETURN TO FACTORY DEFAULT SETTING:
1. Turn the ignition ON then OFF 3 TIMES and stay in OFF position.
2. Push the Valet switch
12
times (holding in on the 12th push) until
Six
chirps with a long chirp is heard then release the valet switch. You are
now in the “Return To Factory Default Setting” programming mode.
3. Press the
+
button on the transmitter together for 6 seconds,
there will be a confirmation six chirp with 3 long chirp and parking light
flash 3 times to confirming the system “Alarm Feature A & B
Programming“ all returns to factory default setting.
RETURN TO START FEATURE FACTORY DEFAULT SETTING:
