System Tab
The System tab contains configuration for audio settings and system
outputs on the MMS and connected devices.
1.
System
a.
System Id: The ID of the MMS device
group
.
Communication between eSeries devices (servers and
amplifiers) is enabled when sharing the same System ID. By
default, eSeries devices are configured for System ID 1 and
therefore will automatically link together.
TIP:
Leaving the system ID at 1 (auto-join) will allow new eSeries
devices to be visible when added to the system. Changing the System
ID will create an isolated music system **
b.
Add system component: Discover additional network
connected devices on another System ID. Adding the device
will reconfigure it with your System ID.
c.
Clear Queue – When set to “on” empties the queue when
the last zone listening to an audio source is turned off.
When toggled off, the MMS queues remain intact, even if
the zones are powered off.
2.
Streamers: Lists all MMS devices sharing the same System Id.
Click the gear icon to edit a device’s configuration or remove
the device from this System Id.
TIP:
When using System Id 1 (auto-join), eSeries devices can only be
removed if they are offline. Otherwise, removing an eSeries device will
reset its System Id back to 1 (default).
a.
Server Details: Lists information such as Model, Serial
Number and Firmware version of the device
b.
Click on the Name field to edit the System name of the
selected device.
c.
Click on the Output name to modify its default label. (e.g.
Player A). When used with eSeries amplifiers, sources are
automatically managed and generally not exposed in control
clients (except in the MMS Web Client). Therefore when
using eSeries amplifier(s) editing the default Output names
is unnecessary.
11
