E) Cutter error
E) Cutter error
E) Cutter error
E) Cutter error
(1) Check timing :
When the cutter works at the cut off mode.
(2) How to check :
By detecting the difference of cutter sensor level.
(3) Cause of the error :
Malfunction of cutter. (Paper stuck to cutter unit)
(4) How to recover :
LCD
How to recover
Beep
sound
ERROR LED
status
Upper Lower
Error detection (Print stops)
ON
ON
E05 Cutter
Error
Press any button down.
OFF
ON
E05 Cutter
Error
Turn power off.
OFF
Remove paper when it is stuck in
to cutter unit. If not, check the
cutter connector.
Turn power on.
OFF
OFF
READY
Note : The received data will be lost after the turning off the power.
F) Over heat
F) Over heat
F) Over heat
F) Over heat
(1) Check timing :
When print starts.
(2) How to check :
a) By detecting head temperature by thermistor.
(3) Cause of the error :
a) Temperature of print head gets to high.
b) Defection of thermistor.
(4) How to recover :
LCD
How to recover
Beep
sound
ERROR
LED
status
Upper Lower
Error detection
(Print stops)
ON
ON
E07
Over Heat !!
Press any button
down.
OFF
ON
Open print head
Head temperature
69
Open print
mechanism.
OFF ON
Open print head
Head temperature
69
Close print
mechanism
after buzzer
sounds.
OFF ON
Close print head
Head temperature
59
Press ‘PAUSE’
button down.
OFF OFF
PAUSE
Press ‘PAUSE’ button
down. (Positioning the
paper and starts printing.
READY
Note : The printing will not be executed until temperature goes down.
Note : The printing will not be executed until temperature goes down.
Note : The printing will not be executed until temperature goes down.
Note : The printing will not be executed until temperature goes down.
