3) Print Method : ‘Print Method /
’.
Function : Selects printing method.
Transfer
For printing with thermal transfer ribbon.
Direct Thermal For printing with thermal paper.
A) The settings becomes valid after exiting from Operation mode.
B) The default is set as “Transfer”.
4) Label Type : ‘Label Type /
’.
Function : Selects paper type to use.
Die cut
For using Die cut label.
Continuous
For using continuous label.
A) Continuous label can not be selected in case of printing with
peel off mode.
B) The setting becomes valid after exiting from Operation mode.
C) The default is set as “Die cut”.
6) Measure label : ‘Measure label /
’.
(Only displayed in case of selecting ‘Die cut’ label)
Function : Select the way of calibrating the paper.
Every time
Start calibrating label automatically every time
the power switch is turned on.
It is recommended in case of frequent change of
paper type.
First
Calibrate the label only when you execute the
calibration. It is recommended to save the label
to avoid unnecessary calibration by the time of
turning on the power switch.
(Please refer “3-6 Procedure of operation” for
more details. )
PGM
Handle the label by the data input manually.
A) The settings become valid after exiting from Operation mode.
B) The default is set as ‘Manual’.
Type
Type
Type
