ON
OFF
Red Lead
B
lue Lead
B
lack Lead
Red Lead
Blue Lead
Black Lead
Turbine
Manual Stop Switch
DC 24V
OUTPUT
Red Lead (R)
Blue Lead (T)
Black Lead (S)
R
S
T
38
Wiring
The three output wires from the wind turbine are Blue / Red / Black and
transform three-phase AC. The three wires need to be connected to the “RST”
terminal located on the back of the digital MPPT charge controller. (Three-
phase power is a method of electric power transmission using three wires) .
The Manual stop switch is pre-wired for your convenience with 10 AWG wire
and battery terminal connections. Place the corresponding wires (red, black,
blue) from the Manual stop switch into the MPPT input terminals. This should
match the similar colored wires from your turbine. Your turbine and stop
switch share input terminals on the MPPT. This provides a parallel connection.
(see figure below).
