10
www.automationdirect.com/click-plc
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860
1-800-633-0405
C2-03CPU Quick Start Guide
Copyright© 2020,
Automationdirect.com
Incorporated/All Rights Reserved Worldwide
FCC and ISED Regulatory Statements
The C2-03CPU has achieved modular radio certification on
a reference design for the United States and Canada . The
reference design has been certified for Part 15.247 (Intentional
Radiator) of the FCC rules and regulations, Industry Canada
RSS-210.
Per FCC 15.19(a)(3) and (a)(4) This device complies with
part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
The C2-03CPU complies with Part 15.247 modular (Inten-
tional Radiator) FCC rules and regulations. Changes or mod-
ifications not expressly approved by AutomationDirect could
void the user’s authority to operate the equipment.
Per RSS-Gen, Section 8.4 this device complies with Industry
Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of
the device.
Par RSS-Gen, Section 8.4 cet appareil est conforme à la norme
RSS Industrie Canada exempt de licence. Son fonctionnement
est soumis aux deux conditions suivantes: (1) cet appareil
ne doit pas provoquer d’interférences et (2) cet appareil doit
accepter toute interférence, y compris les interférences pouvant
causer un mauvais fonctionnement du dispositif.
Accessories
SE-ANT210
Whip/straight
2.4 GHz antenna,
IP65, connector
mount.
SE-ANT250
Dome
2.4 GHz antenna,
IP67, panel mount,
9.8ft/3m cable length.
C2-FILL
Snap-on CPU Option
Slot cover for applications
without an Option Slot
module present.
C0-3TB
Replacement terminal
block for the RS485
communications port.
Sold in packs of 2.
C0-4TB
Replacement terminal
block for the 24VDC
power connection.
Sold in packs of 2.
D0-MC-BAT
Replacement battery for
CLICK PLUS CPU units.
