3
Sales 800-633-0405
www.productivity2000.com
General Specifications
Surrounding Air Temperature 0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Enclosure Type
Open Equipment
Agency Approvals
UL508 File E139594, Canada & USA
CE (EN61131-2*)
Voltage Withstand
(dielectric)
750VDC applied for 2 seconds
Insulation Resistance
>10 MΩ @ 500VDC
Module Location
Power Supply slot in a Productivity2000 System.
EU Directive
See the “EU Directive” topic in the Productivity Suite
Help File. Information can also be obtained at:
www.productivity2000.com
Weight
284g (10 oz)
User Specifications
Input Voltage Range (Tolerance)
24 VAC
(-10% / +20%)
12-24 VDC
(-10% / +20%)
Maximum Input Power
72VA
45W
Maximum Input Ripple
Less than ±5%
Cold Start Inrush Current
45A, 4µS @ 24VDC
Maximum Inrush Current (Hot Start)
Same as Cold Start Inrush Current
Rated Operating Frequency
50 to 60Hz with +/-5% tolerance
Input Fuse Protection (Internal)
MICRO FUSE, 250V, 6.3A, SLOW
Non-replaceable
Recommended Fuse (External)
6A Slow Blow
Input Reverse Polarity Protection
Yes
Output Voltages
24VDC, 0.85 A
3.3 VDC, 3.81 A
Maximum Output Power
32W Combined
Isolated User 24VDC Output
None
Output Protection for Over Current,
Over Voltage, and Over Temperature
Self resetting for both voltage outputs to base
Under Input Voltage Lock-out
Yes, <10VDC
Over Input Voltage Lock-out
No
Input Transient Protection
Transorb Plus Input Choke/Filter
Operating Design Life
10 years at full load at 40°C ambient and
5 years at 60°C ambient
*Meets EMC and Safety requirements. See the D.O.C. for details.
IMPORTANT!
Important Hot-Swap Information
Note: This device cannot be Hot Swapped.
