66
MCS Manual Rev. 1.4
Master/Slave Connection
The following schematic shows the required wiring to operate two compact sensors or one dual head
sensor in a Master/Slave mode. For this purpose the OUT2 of the master sensor is exemplary
connected to the trigger input IN1 of the slave sensor. The Master/Slave mode can be realized with
both inputs (IN1/IN2) and outputs (OUT1/OUT2).
Example configurations for Master/Slave Connections
Two compact sensors to eliminate laser interference
OUT2
IN1
t
t
Exposure max
200µs
Exposure max
200µs
Frame Period 400µs
Frame Period 400µs
MASTER
f=2500 Hz
SLAVE
f=2500 Hz
Triggered after
exposure of
Master Sensor
The falling edge of
Master OUT2
generate a slave
profile trigger
Use Registers:
Master:
Output2 = Out2_IntegrationActive
Output2Invert = true
Slave:
ProfileTriggerMode = CameraInput1
Summary of Contents for MCS 1280 Series
