Page 12
igus XYZ Gantry User Manual – 1st Ed – 09/14/2022
igus
XYZ g
antrY
u
ser
M
anual
SAW Lead Nut Replacement
1. SAW1040
i. Press down to remove old Lead Nut.
ii. Press new Lead Nut into hole in the Carriage Plate until fully seated.
2. SAW1080
i. Remove 4 M5-0.8 x 12mm SHCS to release Lead Nut and Retainer.
ii. Remove old Lead Nut and press in new Lead Nut with groove facing down.
iii. Replace Retainer and re-install screws.
