Page 18
igus XYZ Gantry User Manual – 1st Ed – 09/14/2022
igus
XYZ g
antrY
u
ser
M
anual
Bearing Block Liner Replacement (All Models)
The following assembly steps are performed after the Carriage Plate is removed from the Linear Actuator. For
reinstalling the Carriage Plate, please refer to the SAW or ZLW Assembly Steps.
NOTE: Follow the “Bearing Block Alignment Procedure (All Models)” on page 17 after the Linear Actuator is
fully assembled to ensure the new Bearing Block Liners are fully seated.
Important:
1. Gently turn each of the 4 Clearance adjustment set screws fully counter-clockwise
2. To remove Bearing Liner, push down on the tab and roll.
3. To install new Bearing Liner, drop in and roll until seated
