Automation Direct FLI-150, Quick Setup Manual

Page: 102 / 145

Safety Precautions
CAUTION: SHUT OFF YOUR TOUCH SCREEN BEFORE CLEANING!!
IF YOUR DISPLAY IS A –TS MODEL, THAT IS A TOUCH SCREEN DISPLAY,
THE SCREEN WILL BE ACTUATED BY CLEANING. PRESSING ON THE
SCREEN WHILE CLEANING WILL BE SEEN AS A TOUCH TO THE SYSTEM
WHICH COULD CREATE A POTENTIALLY DANGEROUS CONDITION!!
Do not attempt to service this display yourself. The rear chassis has a seal so
that non qualified personal will not expose themselves to dangerous voltages or
other risks.
To protect from electrical shock, unplug the display power supply from the wall
before moving.
Do not use this display near water
Do not place any heavy objects on the power cords. Damage may cause
electrical shock.
Unplug the power supply from the wall or unit if one of the following conditions
exists.
o
Power cord or plug is damaged or frayed
o
Liquid is spilled into the display or the display is exposed to rain or water.
o
The display does not operate normally when the operating instructions
are followed.
o
The display has been dropped or the enclosure has been damaged.
o
The display exhibits a distinct change in performance, indicating a need
for service.
Ensure that sufficient space is available around the display to provide air
circulation for cooling.
Ensure that the ambient air temperature will not exceed the specified maximum
temperature.
Do not expose the display to direct sunlight or heat.