Automation Direct FLI-150, Quick Setup Manual

Page: 59 / 145

3
Section
Display Features
The FPM-120(-TS) is capable of displaying 256K colors in a continuous spectrum.
The high contrast LCD enhances the image with no geometric distortion.
FPM-120(-TS) Series directly accepts an analog 5 wire RGB with separate H/V. This
is the standard PC video signal.
The FPM-120(-TS) Series is auto synchronous adjusting the display to the
appropriate input between VGA or SVGA..
The FPM-120(-TS) Series is supplied with a Anti-Glare Touch Screeen [TS models]
or an Anti-Glare impact window on non touch screen models.
The FPM-120(-TS) Series has an integrated 115/220VAC power supply as standard
on all models.
Adjusting the Display
The FPM-120 (-TS) Series display has an embedded microprocessor in the converter
card [this is the electronics that drives the LCD]. In most cases the unit will require very
little if any user intervention to operate correctly. That is, produce a sharp stable picture.
The micoprocessor in the display has the capability to adjust itself to the computer to
which it is attached. If the picture is not satisfactory, the first step is to allow the unit to
attempt to adjust itself to your computer.
Located on the rear of the unit is a membrane keypad used for adjusting the display.
See figure 1 below:
Figure 1
Select Menu
Getting
Started