Install the D2–DCM/Starting the Network
22
Data Communications Module, 2nd Edition, 2/03
Connect the cables and follow the procedures outlined in the documentation that
came with your host computer software or operator interface. You’ll have to execute
your host or operator interface program before the communications can begin. For
example, if you’re using
Direct
SOFT32, you can just specify the station address and
start working!
Connect the cables and follow the procedures outlined in your MODBUS
Host
software package to start the communications. See Appendix C for more
information on using the D2–DCM with MODBUS protocol.
If you’re using an
Operator Interface or
Host Computer...
If you’re using
MODBUS
...
Summary of Contents for D2-DCM
