Building the Cable
10
Data Communications Module, 2nd Edition, 2/03
The D2–DCM can be used in either a point-to-point or multi-drop configuration. A
point-to-point connection only has two stations, a master and a slave. Use the
point-to-point configuration to connect a personal computer, an operator interface,
or an intelligent device to a single D2–DCM. You must also use this configuration
when you want to connect a
Direct
NET master station to a single
Direct
NET slave
station.
Use the multi-drop configuration to connect one master to two or more slaves (90
slave maximum).
or
Point to Point
DCM
DL205 Master
Direct
NET PLC Slave
D2–DCM
Direct
NET
Slaves
Direct
NET
Masters
D2–DCM
Multi-drop
or
Consideration 1:
Physical
Configuration
Summary of Contents for D2-DCM
