ATS Series Installation Manual
15
16. Smart Phone Control
(ATS-3 Only)
This device allows for operation of the door when not in line-of-sight of the door and
opener.
The door may operate unexpectedly
, therefore do not allow anything to stay in or near the path of the
door. When the door is not operating automatically, watch the door when it is moving and keep people
away until the door is completely opened or closed.
Contact with the moving door can cause serious
personal injury or damage to property.
It is our strong recommendation that your opener be fitted with
SAFETY BEAMS.
Safety
Beams detect any obstructions in the door/gate’s path and override automatic operation if one
presents. These must be installed as in accordance with AS/NZS 60335-2-95:2012.
This is in addition to regular professional servicing, and monthly obstruction tests as detailed in
Section 12.
16.1 Connecting to Wifi
The Smart Phone Control works via your home’s WiFi network. Initial set
up involves linking your phone app, smart hub and opener to your home
network.
a. Download the ATA App.
b. Ensure the WiFi router is within range of the opener.
c. On the opener press the MODE button repetitively until the NETWORK
LED is lit.
d. Press and hold the OPEN button on the opener for 4 seconds. The NETWORK
LED will
turn purple when Hot Spot is Active.
e. Go to phone settings, then WiFi and select (ATA000000).
f. Open App and tap on Start.
g. Select setup a new Smart Hub
h. When Smart hub hotspot connection appears, select OK got it.
i. Ensure WiFi network = (ATA000000) then select connect to hub.
j. The opener main light and a red NETWORK
LED will start to flash.
k. Press STOP / SET button on the opener.
l. Name your smart hub on the app and select SAVE.
m. Set the time zone and SAVE.
n. Create an admin user and select “OK got it”.
o. Fill in name and password and select CREATE.
p. Fill in email and security question or select skip this step and select SAVE.
q. Select the push notification and select SAVE.
r. Select and connect to WiFi. Choose your home WiFi and fill in password and select connect.
s. The NETWORK
LED will change to solid blue.
t. Now you can test the app.
Ensure limits are set prior to connecting to Wifi.
tip
