Owner Installation Instructions
GDO-7V1 SecuraLift®
25
Parameters
Door Status Indicators
Buttons
Function
Operate
Opens/Stops/Closes the door
Door code
Codes a transmitter button for operate function
Light code
Codes a transmitter button for light function
Door code & Minus (-)
Codes a transmitter button for pet
(pedestrian function
Light code & Minus (-)
Codes a transmitter button for vacation function
Force Margin Set & Plus (+)
Increases the obstruction force margin setting
Force Margin Set & Minus (-)
Decreases the obstruction force margin setting
Force Margin Set (then) Set
Reloads the factory set default obstruction force
margin setting
Auto close time (then) Plus (+)
Increases the auto close delay time
Auto Close Time (then) Minus (-)
Decreases the auto close delay time
Auto Close Time (then) Set
Reloads the factory set default auto close delay time
Force Margin Set & Auto Close Time (then) Plus (+)
Each press of the open button increases the light time
by 10 secs.
Force Margin Set & Auto Close Time (then) Minus (-)
Each press of the open button decreases the light time
by 10 secs.
Force Margin Set & Auto Close Time (then) Set
Reloads the factory default light time
Minus (-) (for 6 secs.)
Clears the door limits set positions. Limits then need
to be reset
Set & close (for 2 secs.)
Enters pet (pedestrian) position mode
Set (then power on) & hold until all LEDs are off
Deletes control parameters excluding transmitter
storage memory
Door Code (then power on) & hold until all LEDs
are off
Deletes all transmitter storage memory
Set & Door Code (the power on) and hold until all
LEDs are off
Deletes all control parameters and transmitter storage
memory.
Set
Re-initialises the Opener to re-calculate force margin
