Owner Installation Instructions
GDO-9v2 SecuraLift®
29
Parameters
Button Functions
Buttons
Function
OPERATE
Opens/Stops/Closes the door
DOOR CODE
Codes a transmitter button for operate function
LIGHT CODE
Codes a transmitter button for light function
DOOR CODE & CLOSE
Codes a transmitter button for pet mode
LIGHT CODE & CLOSE
Codes a transmitter button for vacation function
FORCE MARGIN SET & OPEN
Increases the obstruction force margin setting
FORCE MARGIN SET & CLOSE
Decreases the obstruction force margin setting
FORCE MARGIN SET (then) SET
Resets the factory default force margin settings
AUTO CLOSE TIME (then) OPEN
Increases the auto close delay time
AUTO CLOSE TIME (then) CLOSE
Decreases the auto close delay time
AUTO CLOSE TIME (then) SET
Resets the factory default auto close delay time
FORCE MARGIN SET & AUTO CLOSE TIME (then) OPEN
Each press of the PLUS (+) button increases the
light time by 10 secs.
FORCE MARGIN SET & AUTO CLOSE TIME (then)
CLOSE
Each press of the MINUS (-) button decreases the
light time by 10 secs.
FORCE MARGIN SET & AUTO CLOSE TIME (then) SET
Reloads the factory default light time
CLOSE (for 6 secs.)
Clears the door limits set positions. Limits then
need to be reset
SET & CLOSE (for 2 secs.)
Enters pet (pedestrian) position mode
SET (then power on) & hold until all LEDs are off
Deletes control parameters excluding transmitter
storage memory
DOOR CODE (then power on) & hold until all LEDs
are off
Deletes all transmitter storage memory
SET & DOOR CODE (the power on) and hold until all
LEDs are off
Deletes all control parameters and transmitter
storage memory.
SET
Re-initialises the Opener to re-calculate force
margin
