Automatic Systems SMARTLANE SL 90 Series, Technical Manual

Page: 56 / 66

SL 90X-91X
Technical Manual
NAM-SL 90X-91X-TM-04-EN-E
With a constant view to adopting the latest technological developments, Automatic Systems reserves the right to amend the above information at any time
.
p. 56/66
www.automatic-systems.com
10.13.
INSTRUCTIONS: REMOVING THE MECHANICAL ASSEMBLY
1. Remove the moving glass obstacle (see section 10.6. ).
2. Remove the gear motor (see section 10.12. ).
3. Remove the shutter tube bolts (see item [14] on Figure 29 ) to remove the shutter tube (see item [13]
on Figure 29 ).
4. Unscrew the inductive position sensor connector (see item [19] on Figure 35 ).
5. Unplug the locking mechanism at the corresponding terminal block (see item [2] on Figure 14 ).
6. Remove the bolts [25] (see Figure 38 ).
7. Take the mechanical assembly (see Figure 7 ) out of the housing.
Figure 38 Mechanical assembly mounting bolts