manualshive.com logo in svg

Automatic Heating Modulex EXT 440, Installation And Servicing Instructions

Share
Download
Automatic Heating Modulex EXT 440 Installation And Servicing Instructions Download Page 12

13

Instructions for the installer

3.2 -

STANDARD CODES  FOR
INSTALLATION

The appliance must be installed in compliance to the
instructions contained in this manual.

The installation must be carried out by a competent qualified
engineer, whom will assume the responsibility of complying
to all the local and/or national regulations published in the
official publications, as well as all the applicable codes of
practice.

Before installing the appliance please contact the gas supply
company.

The installation must be carried in accordance to the codes
of practice, the regulations and the requirements hereby
indicated which constitute an indicative list, but not a complete
one, as these continue to undergo evolve devolpments.

Moreover, the boiler must be installed in accordance to all the
regulations regarding the boiler room, the building regulations
and the prescriptions regarding central heating plants in force
in the country where the boiler is installed.

The appliance must be installed, commissioned and serviced
according to the regulations in force. This is also valid for the
hydraulic system, the flue outlet system and the boiler location
room.

Summary of Contents for Modulex EXT 440
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands