17
Toll Free: 1300-350-635 www.catevolution.com.au Aust & NZ
countdown, preventing the Globe from rotating with your cat
inside. You can adjust this time setting by pressing and holding
the Empty button for 5 seconds and then pressing the Reset
button to toggle through the settings. (Blue: 3 minutes, Yellow:
7 Minutes, Red: 15 Minutes)
Caution:
Please make sure that your smallest cat weighs at least
2.5 kg before operating the Litter-Robot in the
unattended Automatic Mode. Your cat must weigh at
least 2.5 kg to trip the Cat Sensor.
Drawer Full Indicator (DFI)
The Litter-Robot is equipped with
infrared emitters and sensors
located above the waste drawer that
detect when the drawer is full. The
Control Panel displays a blue
flashing LED when the DFI is
activated. The Waste Drawer is
checked every time the Globe
returns to Home Position. Upon the
first activation of the DFI, the blue LED flashes, and the Cat
Sensor remains active. Upon the third activation of the DFI (after
2 more cleaning cycles), the Cat Sensor becomes inactive and
the unit will no longer cycle automatically. Check or empty
Waste Drawer and push the Reset button to cancel indicator.
Automatic Night Light
Although cats in general have excellent vision in low light
conditions, as they get older their vision can diminish and the
Automatic Night Light (located in the upper Bonnet) is there to
assist elderly cats find the litter box in extreme low light
conditions such as a basement room without any windows. A
light sensor located below and to the left of the Power button
turns the Night Light on and off automatically. The Night Light
function can be turned on and off by pressing and holding the
Power button (see Control Panel – Button Functions -> Power
button, page 11).
