18
Toll Free: 1300-350-635 www.catevolution.com.au Aust & NZ
Bonnet
The Bonnet functions as a cover and
guard for the waste port as the Globe
rotates from the top of the unit into
the Base.
The Bonnet also provides a mount
location for the Automatic Night
Light, wires, and electrical terminals
that provide a low and safe 5VDC to
the Night Light.
The Globe will not rotate without the
Bonnet installed (see Control Panel -
Indicator Lights -> Yellow LED
Flashing, page 15). The Bonnet is
assembled to the Base by inserting
the tabs at the bottom and rear of the
Bonnet into the small holes in the
Base, and rotating the Bonnet
downward such that the snaps
located at the bottom and front of the
Bonnet are inserted into the matching
slots and latched. Holes above the snaps provide a convenient
finger hold while removing or installing the Bonnet.
See page 25-27 for Bonnet assembly instructions.
Underside of Bonnet
showing Night Light
Bonnet
